G
Live · Registered LIVE/REGISTRATION/Issued and Active
What this record means
The record shows that the mark “G” is live and registered on the Principal Register under serial 79266868, owned by Gienanth GmbH, a German limited liability company. It protects a wide range of metal‑related goods and services, including common metal parts, metal girders, machine housings, metal treating and casting services, and engineering and technical consultancy in metal casting and material testing. A similar name used for products or services within these metal‑manufacturing or engineering fields would raise the closest concern. The record does not give the owner control over every use of the letter “G” in unrelated contexts. The latest maintenance event was a 6‑year post‑registration reminder sent on December 1, 2025. No opposition, cancellation, or court action appears in the supplied history, so there is no visible enforcement signal. If you plan to use a similar name in the metal or engineering sectors, proceed with caution, as the mark’s scope could overlap your use.
Informational only - not legal advice.Mark Trademark, Service Mark
| Drawing type | 5 - AN ILLUSTRATION DRAWING WITH WORD(S)/LETTER(S)/NUMBER(S) IN STYLIZED FORM |
| Filing basis | Madrid Protocol (§66(a)). |
| Status | Registered. The registration date is used to determine when post-registration maintenance documents are due. |
Key dates
| Application filed | Aug 01, 2019 |
| Published for opposition | Sep 15, 2020 |
| Registered (Principal) | Dec 01, 2020 |
| Status date | Dec 01, 2020 |
Goods & services
Common metal, unwrought or semi-wrought; cast iron, unwrought or semi-wrought; common metals and their alloys, unwrought or semi-wrought; eye bolts of metal; rings of metal, in particular pressure-actuated rings of metal; metal girders; supports of metal for machines, motors and engines; sheets and plates of metal; manhole covers of metal
Shafts, in particular balance shafts, crank shafts and transmission shafts; housings for machines, motors and engines; bearing housings, differential housings , and gearbox housings of vehicle motors and engines; pump housings, in particular oil pump housings; cylinder crankcases for machines, motors and engines; shift forks; machine flywheels; shock absorbers for gears being parts of machines; hubs being parts of machines; clutch thrust plates being parts of machines; machine tools for the cutting, casting and forming of materials; motors and engines, except for land vehicles; machine coupling and transmission components, except for land vehicles; crankcases for machines; cylinders for machines; holding devices for machine tools; cylinders for motors and engines; cylinders pistons; cylinder heads for motors and engines; cylinder blocks for diesel and gas engines; neck rings being parts of machines; wall racks; crankcases for oil pumps; balance shafts; brake housings; bearing housings for machines; pressure plates; gearshift forks; gear levers; main bearing covers; oil pump housings; pulleys; rings being parts of machines; bearing covers for machines; covers of metal for crankshaft bearings; crankshaft bearing covers; machine consoles of metal
Housings for electrical control, testing and monitoring apparatus
Housings for parts of motor vehicles, except for motors and engines
Metal treating; metal casting services; heat treatment of metals and alloys; consultancy services relating to the treatment of metal
Industrial analysis and research services in the fields of metal casting and material testing and analysis; engineering services; consultancy and development services relating to material testing and analysis; technological consultancy relating to the casting or custom construction of metals; technical consultancy on the design and development of castings; engineering services relating to metal forming systems; engineering services relating to metal handling systems; design and planning of installations for use in casting of molten metal; design services relating to the treatment of metal; creation of drawings through CAD (computer-aided design); technical engineering in the field of simulation regarding mould filling, solidification, hardening and warping in technical casting processes; casting design
Madrid Protocol · §66(a)
| Intl. registration no. | 1443540 |
| Intl. registration date | Feb 07, 2018 |
| Intl. renewal date | Feb 07, 2028 |
| Date of automatic protection | Mar 05, 2021 |
| Notification of designation | Sep 05, 2019 |
| First refusal flag | Yes |
Owner & representation
| Owner | Gienanth GmbH |
| Address | Ramsener Str. 1, 67304 Eisenberg, GERMANY |
| Entity | GESELLSCHAFT MIT BESCHRÄNKTER HAFTUNG (GMBH) - organized in GERMANY |
| Attorney of record | Christian Wolff |
| Correspondent | Christian Wolff |
| Attorney email | c********@*****.de |
| Correspondent email | 3 emails |
| Correspondent phone | 4********2 |
| Correspondent address | Feldmannstr. 121, Saarbruecken |